Contact Us Catalogue Book Calibration WinPATS Australia AUD

The TnT EL

Portable Appliance Tester

Now With Lithium Ion Battery!

The TnT el
The TnT el

The TnT EL

Available now for just

$738+GST

  • Our latest Portable Appliance Tester
  • Class 1, Class 2, Earth Leakage and Extension Lead Tests
  • Simple Test Procedures and Easy To Read Results
  • 10 Amp Load Current Capacity
  • Powered by a Lithium Ion Battery - Conduct over 3,000 sets of tests per charge
Buy
Download a Product Brochure

The TnT EL is the most affordable new Appliance Tester from Wavecom. Offering an easy to use Portable Appliance Testing system with our fastest microprocessor yet, the TnT EL is the cutting edge in appliance testing technology.

The Next Generation of Appliance Tester

The TnT EL offers a full range of AS/NZS 3760:2022 tests, including Class 1, Class 2, Extension Lead, and Earth Leakage testing. Simple test procedures and LED indicators make testing a breeze.

The TnT EL

Test all day long

With the flexibility of lithium ion battery power, the TnT EL gives you greater versatility with your testing than ever before. The internal lithium ion battery comes with safety focused design and more capacity to run the tester for up to 3000 sets of tests on a single charge.

(Please note: Only TnT EL's manufactured after 01/09/2023 include lithium ion battery capability).

The TnT EL
The TnT EL

Proudly Australian Made

Designed and manufactured in Australia to meet stringent testing requirements - some of the tighest in the world - the TnT EL now sets its own new standard of reliability and ruggedness. Wavecom provide customer service and product support from here in Australia, and all our TnT EL PAT Testers come with a 3 year conditional warranty.

The TnT el

The TnT EL

Available now for just

$738+GST

  • Our latest Portable Appliance Tester
  • Class 1, Class 2, Earth Leakage and Extension Lead Tests
  • Simple Test Procedures and Easy To Read Results
  • 10 Amp Load Current Capacity
  • Powered by a Lithium Ion Battery - Conduct over 3,000 sets of tests per charge
Buy
Technical Specifications
AC Input: 110V-240V 50/60Hz
Mains Supply Tests Checks Polarity and continuity of mains supply by LED indicators (A-N, A-E, and N-E). (Flashing red LED indicates test fail)
Class I Tests - Earthed Appliances Appliance Check: Ensures appliance is plugged in and turned on.
Earth Bond Test: 200mA test current. Pass level Less than 1.0 Ω. Measurement: 0.01Ω to 10 Ω.
Insulation Test: 500VDC/250VDC. Pass level Greater than 1M Ω. Measurement: 0.1Ω to 10MΩ.
*See also: Leakage Test
Class II Tests - Double Insulated Appliances Appliance Check: Ensures appliance is plugged in and turned on.
Insulation Test: 500VDC/250VDC. Pass level greater than 1MΩ. Measurement: 0.1Ω to 10MΩ.
*See also: Leakage Test
Extension Lead Tests Earth Bond Test: 200mA test current. Pass level Less than 1Ω. Measurement: 0.01Ω to 10.0Ωs.
Insulation Test: 500VDC/250VDC. Pass level Greater than 1MΩ. Measurement: 0.1Ω to 10.0MΩ.
Continuity/Polarity Test: 250VAC check continuity and polarity of leads. Displays Pass/Fail.
Power Measurement Leakage Current: 0 to 30.0mA at 200 to 265V.
Load Current: 0.0 to 10Amp (20Amp for TnP EL 20A)
Voltage: 200 to 265VAC - Power Factor: 0.00 to 1.00.
Apparent Power: 0 to 2400VA -Power 0 to 2400W.
Meter Mode® Green flashing LED denotes Meter Mode is engaged.
Load Current: 0.0 to 10 Amps.
Voltage: 200 to 265VAC.
Apparent Power: 0 to 2400VA.
Power: 0 to 2400W.
Leakage Tests Leakage Current: 0 to 30.0mA at 200 to 265V.
Earth Leakage Test: 240VAC Mains. Pass level 1, 2.5, 5.0 mA leakage test levels.
Note 1: Pass level for CLASS 1 is 5 mA; pass level for CLASS 2 is 1 mA.
Note 2: Leakage test may be performed if a standard CLASS 1 or CLASS 2 is not possible.
Battery 6800 mAH, 7.2V, 48.96WH; Charge Time Approximately 4 Hours.